Лебедка на ховер
Отправлено 15 марта 2011 - 20:54
Отправлено 15 марта 2011 - 21:23
Отправлено 16 марта 2011 - 19:53
СпасибоЗдесь картинки посмотри http://www.chinamobil.ru/bb/viewtopic.php?t=2509 Я советую делать съемный квадрат
Отправлено 16 марта 2011 - 20:03
Попробуй с Орским(город) связаться, они для всех делают,мож что подскажет.Спасибо
Отправлено 16 марта 2011 - 20:07
окПопробуй с Орским(город) связаться, они для всех делают,мож что подскажет.
Отправлено 21 апреля 2011 - 10:16
Отправлено 21 апреля 2011 - 10:35
Отправлено 21 апреля 2011 - 10:39
Сзади все место запаска занимает,если убрать то лебедка встает.Чисто практически замеряно,не теория.
При бодике, запаска опускается, может впихнется туда нечто подобное:
4,000 lb (1,814 kg) line pull
Power in and power out
Winch drum centred avoids the interference of rope and provides streamlined appearance
Mechanical load holding and dynamic brake for 100% braking
High efficiency, low amp draw and sealed permanent magnet motor
Full metal 3 stage planetary gear train for greater pulling force
Sliding pin and ring gear clutch for rapid synthetic rope payout
Weather sealed contactor gives better water proof and lower amp. draw
15.2 m (50 ft) of 5.5 mm (7/32") synthetic rope from Dyneema's SK-75 supplied
E/e marked as of EU Directive 97/24/EC. EEC Type - Approval Number: e4*97/24*97/24/8/IX*0036*01
Отправлено 21 апреля 2011 - 10:50
Отправлено 21 апреля 2011 - 10:56
Это от квадрацикла что ли?Cмысл ее ставить,хотя все равно с запаской не войдет
1,814 kg тяги тебе мало?
Тогда через блок 2600кг
Через 2 блока ....
Как часто будешь пользоваться задней лебедкой???
Отправлено 21 апреля 2011 - 11:05
Part Number : PN 129410
Maximum line pull : 4,000 lb (1,814 kg)
Motor : Permanent magnet 800w/1.0hp 12V DC motor
Gear train : 3-stage planetary gears
Gear ratio : 191:1
Brake : Mechanical & dynamic
Clutch : Sliding pin and ring gear
Control : Handlebar rocker switch
Rope (mm x m) : 5.5 x 15.2 (7/32" x 50'), synthetic SK-75
Winch construction : Aluminium die cast housings with steel drum
Rotation of winch : Rope shall be under-wound orientation only
Drum size (mm x mm) : 55 x 119 (2.2" x 4.7")
Mounting bolts pattern (mm x mm) : 76 x 168 (3"x 6.6")
Все упаковка весит всего 12кг
PACKAGE
Winch weight : 8 kg / 17.6 lb (including rope)
Gross weight : 12 kg / 26.4 lb
Box dimension (L x D x H) : 380 x 362 x 144 mm (15" x 14.3" x 5.7")
Отправлено 21 апреля 2011 - 11:12
Seal DS-9.5rs
Features Built-in waterproof receiver for wireless remote control
All sealed high performance motor
Heavy duty series wound motor delivers superior torque output and faster line speed. A built-in thermal detector automatically sends a warning signal to “Remote Control” when motor is over-heated.
Aluminum alloy housings
Tough aluminum alloy die cast housings provide massive structural durability to withstand the strength of 2.0 x rated load of winch.
Hardened steel 3 planetary gear train
Rugged and quiet planetary gearings for maximum mechanical efficiency
Automatic, full load Cone Brake Structure (CBS)
The U.S. Germany, U.K. France, etc patented baking system automatically endures full load without slipping. With CBS, the greater the load on the wire rope, the greater amount of braking is generated by the mechanism. Furthermore, the braking mechanism mounted outside the drum rather than inside the drum expedites heat dispersion and also makes this winch ideal for use with synthetic rope.
Submersible Sealed Contactor
The brand new heavy-duty sealed contactor with silver-alloy contact pads, thick copper buss bars and submersible construction ensures weather resistant. It handles high amps and allows higher duty cycle. The industrial grade contactor is durable, reliable, and rated up to 400A for 12V.
Turn clutch by ergonomic T-handle for rapid rope payout
4 equally positioned pin holes make it possible to reposition freespool clutch. The T-handle ring gear clutch is rotatable for rapid wired rope payout by easy pull-and-turn.
Protective thermal sensor LED
The industrial level Waterproofed Remote Control coming with thermometric LED indicator on the hand-held switch automatically alerts when the motor is over-heated.
SPECIFICATION / PART NUMBERS
Part number : PN 293655
Line pull : 4,309 kg / 9,500 lb
Motor 12V : 3,730 w / 5 hp
Gear train : 3 stage planetary gears
Gear ratio : 159 : 1
Clucth (Freespooling) : Rotating ring gear
Brake (Outside the drum) : Automatic, full load CBS (Cone Brake Structure)
Rope size (mm x m) : 9.5 × 30.5 (3/8" × 100')
Rope type : Synthetic rope SK-75
Drum size (mm x mm) : 63.5 x 228 (2.5" x 9")
Mounting bolts pattern (mm x mm) : 254 x 114 (10" x 4.5")
LINE PULL AND ROPE CAPACITYLayer of Wire Rope Line Pull, kg / lb Total Rope on the Drum, m / ft
1st 4,309 / 9,500 5.8 / 19.1
2nd 3,472 / 7,655 13.1 / 42.9
3rd 2,908 / 6,410 21.7 / 71.2
4th 2,501 / 5,514 30.5/ 100
LINE SPEED AND AMP. DRAW ( 1st layer of rope on the drum)Line Pull, kg / lb Line Speed, mpm / fpm Amp. Draw, 12V
No Load 19.0 / 62.0 60
907 / 2,000 4.7 / 15.4 115
1,814 / 4,000 3.5 / 11.5 210
2,722 / 6,000 2.8 / 9.2 245
3,629 / 8,000 2.3 / 7.6 280
4,309 / 9,500 2.1 / 6.8 380
DIMENSIONS(mm/in)
STANDARD ACCESSORIES
Detachable control box
Remote control
Synthetic rope with hook
Hawse fairlead
Handsaver strap
Recovery damper
Gloves
Battery lead
OPTION ACCESSORIES
Mounting channel
Snatch block
Winch accessory kit
Circuit breaker
PACKAGE
Winch weight : 28 kg / 61.7 lb
Gross weight : 40.5 kg / 89.1 lb
Box dimension, (L x D x H) : 682 × 209 × 453 mm (26.8" × 8.2 " × 17.8")
Отправлено 21 апреля 2011 - 11:19
Отправлено 21 апреля 2011 - 11:23
Отвечаю,через блок усилие удваивается,откуда у тебе 2600 получилось?Ревизию лебедке делать обязательно,крепить кевлавр также как был закреплен стольной,отключатель массы механический,провода любые соответствующего сечения,способов заплетки в инете полно,что еще забыл.Про оплетку последнего и первого метра вообще не понял зачем?
Опечатался 3600кг.
Подробней про обязательную ревизию, если не трудно?
Стальной был обжат металом и прикручен зажимом, кевлар тоже обжимать?
Какой именно отключатель массы, ясто дело что механический
Какое именно сечение проводов искать?
Какой лучший способ заплетки самый лучший?
Оплетка для привлечения внимания что дальше сматывать не следует и предотвращает перетирание троса.
Отправлено 21 апреля 2011 - 11:29
Отправлено 21 апреля 2011 - 11:32
Обьясни к чему все эти картинки ты тут выложил?Вроде ты уже с лебедой определился
С передней определился, а с задней нет,
а ты тут заявил что 4,000 lb (1,814 kg) line pull от квадрика не катит
С каждым ответом вопросов прибавляется,а вопросы все банально простые,не интересно,извини!
Ответь подробно и посуществу тогда не будут прибавляться.
Сообщение отредактировал LEXX: 21 апреля 2011 - 14:11